How to fix a sewing machine that doesn't work

Various problems can arise, ranging from thread problems, then disappointing sewing results, and many other problems.




There are several types of sewing machines, including classic or traditional black sewing machines complete with sewing tables. Second, there is a high speed sewing machine, then there is an overlock machine which is said to be often used in the convection business.


It doesn't stop there, there are also machines for attaching buttons, as well as a two-chain needle sewing machine and an overdeck sewing machine.


The various sewing machines above certainly cannot be separated from the possibility to be repaired if it is needed. In general, the function of a sewing machine is to connect the corners of the fabric to one another.


The result can be clothes, or various other things that people wear. When the sewing machine breaks down, there are several ways to repair the sewing machine, as below.


Repairing Sewing Machine Due to Thread Problem


The first problem that can be fixed independently, in the event of a break in the sewing thread. If the condition of the upper sewing thread often breaks easily, then some steps that can be taken are:


Pay attention to whether there is a reverse wheel engine or not. This should not happen even for a short time.

Pay attention to whether the position of the sewing needle is perfect or not. That means it can't be too high or too low.


Correctly match the thread number, as well as the needle number exactly to the fabric to be sewn.


Then if what happens is that the bottom thread breaks, then how to repair the sewing machine can go through the various steps below, including:


The correct location for attaching the spool and lifeboat is when the thread is pulled counterclockwise.


Pay attention to whether the bottom thread has passed through the lifeboat housing or not.


Repairing Sewing Machines Due to Loose Stitches and Wrinkles


Those are the two options for repairing a sewing machine, if the problem lies with the bottom thread and the top thread. Now if other problems are caused by unsatisfactory sewing results, such as shrinking and so on.


So there are several ways that can be done, first if the stitches are loose, the repair steps are:


Balance the top and bottom threads.


Loose on the top thread can be overcome by turning the tension regulator, to the right until it jams.

Conversely, if the lower thread pressure is loose, turn it to the left until it jams.


Ensure that the pressure on the bottom and left threads is evenly distributed.


Furthermore, if the problem lies in the shrinkage of the seam, it is necessary to pay attention to several repair steps, namely:


Check the engine lifeboat to make sure that the pressure on the bottom thread is perfect. Not loose and not too drag.


If the bottom thread is too tight, the seam will likely shrink. Then twist the top thread to the left slightly, until you get the perfect tension.


Those are the various steps that you can easily apply, when facing a sewing machine that doesn't work properly. Given how important a sewing machine is for a variety of tasks, it is important to know how to properly repair a sewing machine.

No comments for "How to fix a sewing machine that doesn't work"